3-S3
L2800, L3400, WSM
TRANSMISSION (MANUAL TYPE)
2. SERVICING SPECIFICATIONS
[L2800]
W1013874
Item
Factory Specification
Allowable Limit
Gear
Backlash
0.1 to 0.3 mm
0.004 to 0.012 in.
0.4 mm
0.016 in.
Gear to Spline
Clearance
0.030 to 0.078 mm
0.0012 to 0.0031 in.
0.2 mm
0.0079 in.
Shift Fork to Shift Gear Groove
Clearance
0.15 to 0.40 mm
0.006 to 0.016 in.
0.6 mm
0.024 in.
Shift Fork to Shifter Groove
Clearance
0.15 to 0.40 mm
0.006 to 0.016 in.
0.6 mm
0.024 in.
Shift Fork Spring
Free Length
22 mm
0.866 in.
20 mm
0.787 in.
Reverse Gear Bushing to Reverse Shaft
Clearance
0.020 to 0.054 mm
0.0008 to 0.0021 in.
0.3 mm
0.0118 in.
Spiral Bevel Pinion and Differential
Assembly
Combined Turning
Torque
1.96 to 2.94 N·m
0.2 to 0.3 kgf·m
1.45 to 2.17 ft-lbs
–
Spiral Bevel Pinion to Bevel Gear
Backlash
Tooth Contact
Center of Tooth
Contact
0.15 to 0.30 mm
0.0059 to 0.0118 in.
–
–
–
More than 35 %
1/3 of the entire
width from the
small end
Differential Case Bore to Differential Side
Gear Boss
Differential Case Bore
Differential Side Gear Boss
Clearance
I.D.
O.D.
0.025 to 0.124 mm
0.00098 to 0.00488 in.
38.025 to 38.065 mm
1.49704 to 1.49862 in.
37.941 to 38.000 mm
1.49374 to 1.49696 in.
0.35 mm
0.0138 in.
–
–
Differential Pinion Shaft to Differential
Pinion
Differential Pinion
Differential Pinion Shaft
Clearance
I.D.
O.D.
0.080 to 0.122 mm
0.00315 to 0.00480 in.
19.959 to 19.980 mm
0.78579 to 0.78661 in.
20.060 to 20.081 mm
0.78976 to 0.79059 in.
0.30 mm
0.0118 in.
–
–
Differential Pinion to Differential Side Gear
Backlash
0.15 to 0.30 mm
0.0059 to 0.0118 in.
0.4 mm
0.016 in.
KiSC issued 08, 2007 A
Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland
