9-S18
L2800, L3400, WSM
ELECTRICAL SYSTEM
(9) Combination Switch
Remove the Combination Switch
1. Remove the panel board (1), and disconnect the combination
switch connector 8A (3) after turning the main switch OFF
position.
2. Perform the following checkings.
W10207990
Conector Voltage
1. Disconnect the connector 8A from the combination switch.
2. Measure the voltage with a voltmeter across the connector B1
terminal and chassis when the main switch is OFF position.
3. If the voltage differs from the battery voltage, the wiring harness
is faulty.
4. Measure the voltage with a voltmeter across the connector B2
terminal and chassis when the main switch is ON position.
5. If the voltage differs from the battery voltage, check the wiring
harness and main switch.
W1073019
(1) Combination Switch
(2) Panel Board
(2) Combination Switch 8A Connector
Voltage
Main switch at “OFF”
position
B1 terminal – Chassis
Battery
voltage
Main switch at “ON”
position
B2 terminal – Chassis
(A) Wire Harness Side Connector 8A
KiSC issued 08, 2007 A
Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland