2-S6
L2800, L3400, WSM
CLUTCH
4. CHECKING, DISASSEMBLING AND SERVICING
[1] CHECKING AND ADJUSTING
Adjusting Clutch Pedal Free Travel (L2800)
1. Stop the engine and remove the key.
2. Slightly depress the clutch pedal and measure free travel at top
of pedal stroke.
3. If adjustment is needed, loosen the lock nut (1), and turn the turn
buckle (2) to adjust the clutch pedal free travel within factory
specification.
4. Retighten the lock nut (1).
W1011840
Adjusting Clutch Pedal Free Travel (L3400)
1. At first adjust the clutch pedal free travel, as is mentioned above.
2. Remove the cover located on the right side of flywheel housing
case.
3. Loosen the lock nut (1), tighten the adjust bolt (2) by using 6 mm
spanner until head of the bolt contacts pressure plate slightly.
Make 7/6 turn counterclockwise to give 1.4 to 1.5 mm (0.055 to
0.059 in.) clearance.
4. Tighten the lock nut (1), holding the adjusting bolt (2).
5. Turn the flywheel to adjust the clearance of other adjusting bolts
(three bolts).
6. Repeat step 3 and readjust clutch pedal free travel if necessary.
W1014671
Clutch pedal free travel
Factory spec.
20 to 30 mm
0.8 to 1.2 in.
(1) Lock Nut
(2) Turnbuckle
Clearance (A) between
pressure plate and
adjusting bolt
Factory spec.
0.95 to 1.00 mm
0.037 to 0.039 in.
Tightening torque
Lock nut
15.7 to 21.6 N·m
1.6 to 2.2 kgf·m
11.6 to 15.9 ft-lbs
(1) Lock Nut
(2) Adjusting Bolt
A : Clearance
B : 6 mm (0.24 in.)
KiSC issued 08, 2007 A
Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland
