3-S9
L2800, L3400, WSM
TRANSMISSION (MANUAL TYPE)
Separating Engine from Clutch Housing Case
1. Check the engine and clutch housing case are securely mounted
on the disassembling stands.
2. Remove the engine mounting screws, and separate the engine
from the clutch housing case.
(When reassembling)
• Apply grease to the splines.
• Apply liquid gasket (Three Bond 1208D or equivalent) to joint
face of the engine and clutch housing case.
W1026299
(2) Separating Clutch Housing Case
Outer Components
1. Remove the grip (1) and auxiliary change lever guide (3).
2. Remove the grip (2).
3. Remove the grip (4) and position control lever guide (5).
4. Remove the housing cover (7) and center cover (6).
5. Remove the step (8) (R.H), (L.H).
6. Remove the steering support (9).
7. Remove the suction pipe (10).
(When reassembling)
W1013738
Delivery Pipe and Return Pipe
1. Check the clutch housing case and transmission case are
securely mounted on the disassembling stands.
2. Remove the return pipe (1) and delivery pipe (3).
3. Remove the brake rods (2) (R.H), (L.H).
(When reassembling)
W1027455
Tightening torque
Engine mounting screws to
clutch housing
48.1 to55.8 N·m
4.9 to5.7 kgf·m
35.4 to41.2 ft-lbs
Tightening torque
Steering support mounting
screw
77.5 to 90.2 N·m
7.9 to 9.2 kgf·m
57.2 to 66.5 ft-lbs
(1) Grip
(2) Grip
(3) Auxiliary change lever guide
(4) Grip
(5) Position Control Lever Guide
(6) Center Cover
(7) Housing Cover
(8) Step
(9) Steering Support
(10) Suction Pipe
Tightening torque
Delivery pipe joint bolt
49.0 to 69.0 N·m
5.0 to 7.0 kgf·m
36.1 to 50.6 ft-lbs
(1) Return Pipe
(2) Brake Rod
(3) Delivery Pipe
KiSC issued 08, 2007 A
Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland
