2-S10
L2800, L3400, WSM
CLUTCH
Separating Engine from Clutch Housing Case
1. Check the engine and clutch housing case are securely mounted
on the disassembling stands.
2. Remove the engine mounting screws, and separate the engine
from the clutch housing case.
(When reassembling)
• Apply grease to the splines.
• Apply liquid gasket (Three Bond 1208D or equivalent) to joint
face of the engine and clutch housing case.
W1017559
(2) Separating Clutch Assembly
Clutch Assembly
1. Insert the clutch center tool.
2. Remove the clutch assembly together with the clutch center tool.
(When reassembling)
• Direct the shorter end of the clutch disc boss toward the flywheel.
• Apply molybdenum disulphide (Three Bond 1901 or equivalent)
to the splines of clutch disc boss.
• Insert the pressure plate, noting the position of straight pins.
IMPORTANT
■
• Be sure to align the center of disc and flywheel by inserting
the clutch tool set.
NOTE
■
• Do not allow grease and oil on the clutch disc facing.
W1017686
Tightening torque
Engine mounting screws to
clutch housing
48.1 to55.8 N·m
4.9 to5.7 kgf·m
35.4 to41.2 ft-lbs
Tightening torque
Clutch cover mounting
screws and reamer screws
23.5 to 27.5 N·m
2.4 to 2.8 kgf·m
17.5 to 20.3 ft-lbs
(A) L3400
(B) L2800
KiSC issued 08, 2007 A
Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland