G-23
L2800, L3400, WSM
G GENERAL
Checking Engine Start System (HST Type)
CAUTION
• Do not allow anyone near the tractor while testing.
• If the tractor does not pass the test do not operate the
tractor.
■
Test : Switch for the speed control pedal
1. Sit on the operator's seat.
2. Depress the speed control pedal to the desired direction.
3. Depress the clutch pedal fully.
4. Disengage the PTO clutch control lever.
5. Turn the key to "START" position.
6. The engine must not crank.
■
Test : Switch for the PTO gear shift lever
1. Sit on the operator's seat.
2. Engage the PTO gear shift lever.
3. Depress the clutch pedal fully.
4. Place the speed control pedal in "NEUTRAL" position.
5. Turn the key to "START" position.
6. The engine must not crank.
■
Test : Switch for the clutch pedal
1. Sit on the operator's seat.
2. Disengage the PTO gear shift lever.
3. Place the speed control pedal in "NEUTRAL" position.
4. Release the clutch pedal.
5. Turn the key to "START" position.
6. The engine must not crank.
■
Test : Switch for the operator's seat
1. Sit on the operator's seat.
2. Start the engine.
3. Engage the PTO gear shift lever.
4. Stand up. (Do not get off the machine.)
5. The engine must shut off after approximately 1 second.
W1039549
(1) Clutch Pedal
(2) PTO Gear Shift
(3) Speed Control Pedal
KiSC issued 08, 2007 A
Tractor Manuals Scotland - Please Do Not Copy
Tractor Manuals Scotland
