Woodway 4Front, Service Manual

Page: 46 / 97

46 05/2016 – SM-MT-EN-02
Perform the following steps in order to properly reinstall the Desmo display:
1. Attach display housing to wire form using hardware removed above.
2. Re-attach all cables.
3. Test the new board. Make sure treadmill operates as expected without issues.
4. Re-install back cover using hardware removed above.
5. Re-install cup holders by sliding them down onto their posts and lining up the “T” on
the display with the slot on the cup holder.
6.2.2 Mercury/Path
Fig. 48 Display replacement, Mercury/Path
1. Display housing mounting screws
2. Display board mounting screws
3. Display housing
4. Display board
Standard screwdriver
Phillips head screwdriver
Perform the following steps in order to properly remove the Mercury/Path display:
1. Unplug treadmill from power source. Ensure that it cannot be turned back on.
2. Remove the 8 screws attaching the display assembly to the handrail (Pos. 1).
3. Carefully, remove the connectors that plug into the display.
Installation
Tools Needed
Removal