Woodway 4Front, Service Manual

Page: 36 / 97

36 05/2016 – SM-MT-EN-02
Fig. 24 Desmo assembly, adjusting side covers
- Position the side covers so that a ¼ in. (5 mm)
gap is visible.
- Then tighten all screws.
Note:
The side covers must not be in contact with the
running surface or drive belts on the rear left
side!
5.4 ELG
Please contact your local representative for ELG assembly assistance.
5.5 Mercury, Path
Tools required for assembly:
 1 x combination wrench or ratchet wrench, ½”
 1 x Phillips head screwdriver, #2
Fig. 25
Mercury/Path assembly, side covers
- Remove the cover plates and side covers on
both sides.
Fig. 26
Mercury/Path assembly, electronic cover plate
- Remove electronic cover plate on the right side
of the treadmill frame.