Woodway 4Front, Service Manual

Page: 44 / 97

44 05/2016 – SM-MT-EN-02
6 Parts Replacement
Make sure to read all directions before beginning any maintenance or removing any
hardware from the device.
CAUTION
Worn or damaged components must be replaced immediately. If the observed
deficiency can cause danger to the user or operator of the treadmill, it needs
to be taken out of service until repaired.
DANGER
Danger of Death by Electric Shock!
Maintenance, parts replacement, and inspection work on the unit may cause
serious or fatal electrical shock.
►
Pull power plug before cleaning or servicing; equipment must not be con-
nected to power.
►
Ensure the device cannot be switched back on.
6.1 Ordering Parts
Original WOODWAY parts can only be ordered through WOODWAY Customer Service.
Before ordering replacement parts, you will need to know the serial number of your ma-
chine (located on name plate on back of display or inside of the frame near the front of
the machine).
In the event that your treadmill is not covered under warranty (see Section 10 Page 81),
a purchase order will be required.
6.2 Display Replacement
The steps for replacing the treadmill display vary among treadmill models.
Save all removed hardware for installation of the new board, including screws and lock
washers. Make special note of ground tab position.