P a g e
|
34
The “GO” button will change to a “STOP” button and the “NEXT” button will
become grayed out. The Controller will tell the ODU to move the antenna
motors in all axis sequentially, first elevation, then skew and finally azimuth
before stowing the antenna.
iii.
Once all three motors have been processed thru the calibration, the
“NEXT” button will become available again.
If this happens then the system completed a successful calibration. Tapping
the “NEXT” button will move the configuration to the next step on item 7.
7.
CALIBRATE COMPASS screen -
After the CALIBRATION screen the system continues to the HEADING screen and
will display one of two screens depending on the currently selected COMPASS
MODE.
Since a compass Verification and Calibration will be performed after the
configuration is complete, it is not necessary to change the compass values at this
time.
a)
If the system is in FIXED mode, the following screen will appear.
At this time select “NO” to go to step 8.
Summary of Contents for 2-WAY SATELLITE INTERNET SYSTEM
Page 10: ...P a g e 10 3 Open lids on both sides as shown below ...
Page 19: ...P a g e 19 ...
Page 56: ...P a g e 56 ...
Page 81: ...P a g e 81 9 4 Wiring Diagram User Supplied Device ...
