Winegard 2-WAY SATELLITE INTERNET SYSTEM Product Manual Download

Page: 5 / 86

P a g e

1. Scope

The purpose of this document is to provide Installers, Technicians and End Users
with a complete Winegard 2-Way Product manual which fulfills the roles of an

Installation Manual, Operation Manual and Service Manual.

2. Warnings and Hazards

Automated Machinery – The outdoor

antenna system may start moving

anytime the indoor controller is powered
on. Lockout/tag out procedures should

be followed before servicing. Servicing

should only be completed by trained,

authorized personnel.

There are no user serviceable parts inside

the unit.

Warning – Bodily Injury Hazard – The

antenna assembly may rotate around the
mount base. Keep fingers and other body

parts away.

Caution

– Risk of Danger

Caution

–

Crush Hazard

Summary of Contents for 2-WAY SATELLITE INTERNET SYSTEM























































































Search results

Summary of Contents for 2-WAY SATELLITE INTERNET SYSTEM

Reviews:

Related manuals for 2-WAY SATELLITE INTERNET SYSTEM

Brands by name

Popular brands

Winegard 2-WAY SATELLITE INTERNET SYSTEM, Product Manual

Search results

Summary of Contents for 2-WAY SATELLITE INTERNET SYSTEM

Reviews:

Related manuals for 2-WAY SATELLITE INTERNET SYSTEM

Brands by name

Popular brands