P a g e
|
30
3.
ENTER PASSCODE screen -
The next screen that appears is a numerical pad requesting input of the Passcode.
The Passcode is set from the factory to a default of “1234”.
If an incorrect value is entered, the DEL button will allow you to backspace one
character per tap.
After entry of the pass code “1234”, press the “NEXT” button to continue the
configuration.
4.
ANTENNA SETUP screen -
The next screen that appears is the ANTENNA SETUP screen.
This step of the configuration asks if you want to perform movement of the antenna
for installation purposes. It is not necessary to perform antenna movement to
configure the controller.
a)
If you select “NO” you will be taken to the EMERGENCY screen on item 5.
b)
If you select “YES” the following screen will appear:
Summary of Contents for 2-WAY SATELLITE INTERNET SYSTEM
Page 10: ...P a g e 10 3 Open lids on both sides as shown below ...
Page 19: ...P a g e 19 ...
Page 56: ...P a g e 56 ...
Page 81: ...P a g e 81 9 4 Wiring Diagram User Supplied Device ...
