P a g e
|
37
9.
The MODEM SELECTION screen allows interfacing with a number of modem
manufacturers and models.
Each modem selection causes some selection changes in the screens that follow due
to different information being required.
Some of the selections such as iDirect and Hughes work with the entire line of
modems and some selections are specific to each modem type.
i.e. - The iDirect selection works with all Infinity and Evolution modems but the
Comtech selection does not work with ViperSat. Therefore, there is a specific
selection for Comtech and one for Comtech Vipersat.
There are three basic modem selections that require different sets of information to
configure the controller:
1.
Generic - (Primarily used for troubleshooting)
Satellite Longitude
Carrier Frequency
Symbol Rate
Rx Polarization
2.
HughesNet - Self Configuring
3.
Others (iDirect, Nera, Spacenet, Comtech, Comtech Vipersat, LinkStar)
Satellite Longitude
Rx Polarization
For the purpose of this manual the iDirect selection will be made and its associated
screens will be described.
Select “iDirect” and tap the “NEXT” button, the following screen appears:
a.
Next choose either Modem or DVB search option. Winegard recommends that
you always select “MODEM” if interfaced to a modem which is available on our
MODEM SELECTION list but there may be times when “DVB” may be desired.
Summary of Contents for 2-WAY SATELLITE INTERNET SYSTEM
Page 10: ...P a g e 10 3 Open lids on both sides as shown below ...
Page 19: ...P a g e 19 ...
Page 56: ...P a g e 56 ...
Page 81: ...P a g e 81 9 4 Wiring Diagram User Supplied Device ...
