P a g e
|
53
7.
UPDATE screen -
The UPDATE screen allows the user to either update the firmware on the Controller
and ODU or access the configuration reset screen.
The Automatic button is always grayed out and the heading on this screen has the
added (Manual) header.
Manual is the only option available at this time.
a)
RESET CONFIG -
Selecting to RESET CONFIG button will take the controller into the screen above.
The configuration file contains the parameters set during the Configuration
section of this manual.
RESET will delete all configuration parameters from the configuration file and
rebuild it using factory values.
REPAIR erases only the parameters that are not absolutely required to point the
antenna but retains the critical components of the configuration such as
longitude and polarization information.
Summary of Contents for 2-WAY SATELLITE INTERNET SYSTEM
Page 10: ...P a g e 10 3 Open lids on both sides as shown below ...
Page 19: ...P a g e 19 ...
Page 56: ...P a g e 56 ...
Page 81: ...P a g e 81 9 4 Wiring Diagram User Supplied Device ...
