P a g e
|
47
Move the vehicle in a 360 to 720 degree circle in a large area and
watch the compass live output until it begins to reflect the correct
heading compared to your hand held compass.
The “STOP” button simply stops the calibration and the moving
arrows.
The “NEXT” button sets the calibration and exits the calibration
screen to the HEADING screen.
iv.
As long as the HEADING screen reflects a heading within 15 degrees of
the value sampled from the handheld compass, then compass
calibration is complete. Proceed to step 5.
6.5.3 - FIXED Heading
There will be times when using the compass may not be the best choice.
Some instances where you may want to override the compass include:
If the compass is not calibrated and the resources to calibrate it are not
available or time does not permit the full calibration.
For troubleshooting purposes.
To have the ability to close down the search window by giving the system a
more accurate heading.
How to Override the Compass
1.
Tap the heading display below the Compass Mode output in the Main Menu.
Summary of Contents for 2-WAY SATELLITE INTERNET SYSTEM
Page 10: ...P a g e 10 3 Open lids on both sides as shown below ...
Page 19: ...P a g e 19 ...
Page 56: ...P a g e 56 ...
Page 81: ...P a g e 81 9 4 Wiring Diagram User Supplied Device ...
