Winegard 2-WAY SATELLITE INTERNET SYSTEM Product Manual Download

Page: 50 / 86

P a g e

6.6 - Advanced User Data

The Advanced User menu is denoted by the Wrench Icon on the Main screen.

Here the controller displays sensor data, network information, software versions and
allows for calibration of the motors and updating of the firmware.

In the Advanced User Data screens, pressing the Main Menu will take you out of the

Advanced User Data section and return to the Main Screen.

6.6.1 - Accessing the Advanced User Data

Tapping the Wrench Icon in the Main Menu enters the display into the Advanced

User Data screens.

POSITION STATISTICS screen -

The POSITION STATISTICS screen is the first screen available in the Advanced User

Data section. It displays live Pitch and Roll data from the antenna Tilt Sensors.
Select “NEXT” to advance to more data.

Summary of Contents for 2-WAY SATELLITE INTERNET SYSTEM























































































Search results

Summary of Contents for 2-WAY SATELLITE INTERNET SYSTEM

Reviews:

Related manuals for 2-WAY SATELLITE INTERNET SYSTEM

Brands by name

Popular brands

Winegard 2-WAY SATELLITE INTERNET SYSTEM, Product Manual

Search results

Summary of Contents for 2-WAY SATELLITE INTERNET SYSTEM

Reviews:

Related manuals for 2-WAY SATELLITE INTERNET SYSTEM

Brands by name

Popular brands