Winegard 2-WAY SATELLITE INTERNET SYSTEM Product Manual Download

Page: 29 / 86

P a g e

6.4.2 - Configuring the Controller

Configuring the Winegard Controller is a rather simple process which is based on two

sections of configuration that run concurrently.
The first section consists of question screens asking if the user wants to move the

antenna or perform calibrations and the second section is primarily centered around
the modem and service parameters for the search.

How to Configure the Controller

Tap the Authorized Installer Menu Icon in the Main Menu.

The controller will enter the Installation menu section. The INSTALLATION MENU

screen asks if you want to select “AUTHORIZED INSTALLER” for configuration
purposes or “MAIN MENU” to back out of the Installation menu.

Tap the “AUTHORIZED INSTALLER” button.

Summary of Contents for 2-WAY SATELLITE INTERNET SYSTEM























































































Search results

Summary of Contents for 2-WAY SATELLITE INTERNET SYSTEM

Reviews:

Related manuals for 2-WAY SATELLITE INTERNET SYSTEM

Brands by name

Popular brands

Winegard 2-WAY SATELLITE INTERNET SYSTEM, Product Manual

Search results

Summary of Contents for 2-WAY SATELLITE INTERNET SYSTEM

Reviews:

Related manuals for 2-WAY SATELLITE INTERNET SYSTEM

Brands by name

Popular brands