Wincor Nixdorf ProCash 2050xe USB Installation Manual Download Page 168

Page: 168 / 202

Remote status indicator - standard

Installing the Remote Status Indicator

156

ProCash 2050xe USB - Installation Guide

01750058390 G

Installation

•

Remove the standard remote status indicator from the packaging.

Use a screwdriver to press carefully

through openings (1) and (2) until the
tabs behind them disengage.

Remove the front cover (3) forwards.

When drilling the mounting
holes, take note of the
constructional situation
(energy, media line, etc.).

Position the lower section and mark
the points where it is to be secured.

•

In masonry only:

Drill the necessary bores: drill depth: 20 mm (0.79"), drill diameter: 4 mm
(0.16"), and insert the enclosed fixings in the holes.

Secure the lower section to the wall

with the enclosed screws and press
the front cover onto the lower section.

Summary of Contents for ProCash 2050xe USB











































































































































































































Search results

Summary of Contents for ProCash 2050xe USB

Reviews:

Related manuals for ProCash 2050xe USB

Brands by name

Popular brands

Wincor Nixdorf ProCash 2050xe USB, Installation Manual

Search results

Summary of Contents for ProCash 2050xe USB

Reviews:

Related manuals for ProCash 2050xe USB

Brands by name

Popular brands