Wincor Nixdorf ProCash 2050xe USB Installation Manual Download Page 125

Page: 125 / 202

Installation

Installation with 222 mm (8.74") installation frame

01750058390 G

ProCash 2050xe USB - Installation Guide

113

Installation with 222 mm (8.74") installation
frame

The following description refers to the installation of the ProCash 2050xe USB
with 4-cassette dispenser with the same floor height.

Mounting the installation frame

Observe the specified maintenance space when positioning the device

and the installation frame (see chapter "Planning the Installation",
section "Space required for operation and maintenance").

Make sure that the clearance between the vents and the wall is at
least

50 mm (1.97") (53 mm (2.09")

in relation to the installation

frame).

•

Align the installation frame and mark the holes to be drilled for mounting
the installation frame (see illustration below).

If a tear-off sensor is to be installed as agreed with the financial

institution or the alarm technician, also mark the holes for the tear-
off sensor (see illustration below).

Summary of Contents for ProCash 2050xe USB











































































































































































































Search results

Summary of Contents for ProCash 2050xe USB

Reviews:

Related manuals for ProCash 2050xe USB

Brands by name

Popular brands

Wincor Nixdorf ProCash 2050xe USB, Installation Manual

Search results

Summary of Contents for ProCash 2050xe USB

Reviews:

Related manuals for ProCash 2050xe USB

Brands by name

Popular brands