Wincor Nixdorf ProCash 2050xe USB Installation Manual Download Page 173

Page: 173 / 202

Installing the Remote Status Indicator

Remote status indicator - audio

01750058390 G

ProCash 2050xe USB - Installation Guide

161

•

In masonry only:

Drill the necessary bores: drill depth: 40 mm (1.57"), drill diameter: 6 mm
(0.24"), and insert the enclosed fixings in the holes.

Secure the lower part to the wall with

the screws supplied and mount the
front cover on the back panel as
described above under removal.

An adhesive label with the
number 1 is applied in the
factory.

Remove the required label (1) and
apply it to the space provided (2) on
the audio remote status indicator.

•

Lay the connecting cable of the audio Remote Status Indicator to the
appropriate device.

Summary of Contents for ProCash 2050xe USB











































































































































































































Search results

Summary of Contents for ProCash 2050xe USB

Reviews:

Related manuals for ProCash 2050xe USB

Brands by name

Popular brands

Wincor Nixdorf ProCash 2050xe USB, Installation Manual

Search results

Summary of Contents for ProCash 2050xe USB

Reviews:

Related manuals for ProCash 2050xe USB

Brands by name

Popular brands