Wincor Nixdorf ProCash 2050xe USB Installation Manual Download Page 153

Page: 153 / 202

Installation

Installing the tunnel frame

01750058390 G

ProCash 2050xe USB - Installation Guide

141

Installing the tunnel frame

After the system has been attached to the installation frame or the installation
rack, the sealing frame and the tunnel frame can be mounted.

Installation is the same for a device with a 35 mm (1.38") tunnel and a

60 mm (2.36") tunnel. How the tunnel is installed is described below
for a 35 mm (1.38") tunnel.

The required material is contained in a separate packing unit.

For the sake of clarity, the illustrations on the following pages

demonstrating the individual steps do not show the wall.

Installation is to the greatest extent the same for a tunnel frame with

and without illumination. Any differences that exist are described here
explicitly. The illustrations show the device with illumination.

Summary of Contents for ProCash 2050xe USB











































































































































































































Search results

Summary of Contents for ProCash 2050xe USB

Reviews:

Related manuals for ProCash 2050xe USB

Brands by name

Popular brands

Wincor Nixdorf ProCash 2050xe USB, Installation Manual

Search results

Summary of Contents for ProCash 2050xe USB

Reviews:

Related manuals for ProCash 2050xe USB

Brands by name

Popular brands