Whittemore Enterprises Inc. EAGLE TWO PLUS Instructions/Service Manual Download Page 42

Page: 42 / 109

USER GUIDE |

EAGLE TWO+

Version: 3.3

The PREM Alarm indicator illuminates red. If the self-test is successful, connect the
Accessories and set the generator controls.

PROGRAMMING THE GENERATOR



Programming of User Programs

: Please follow user programs guide.

(Chapter 3 –subsection F)

PATIENT RETURN ELECTRODE MONITORING (PREM)

PREM electrode is used in monopolar surgery modes. Always ensure that
the contact between Patient skin & Patient Return Electrode is adequate.
Bar below PREM icon indicates the contact adequacy.

Icon

Contact Quality

Excellent

100% Contact with patient.

Safe

Contact with patient is proper and safe.

Moderate

Contact with patient is moderate & viable. If

possible try to improve the contact, connect

PREM dual area plate properly. Take appropriate

measures to improve the contact quality.

Poor

It‟s not recommended to continue with the

surgery; Check PREM connection or replace the

notPREM electrodes.

No contact

PREM patient plate is not connected or is

damaged.

Summary of Contents for EAGLE TWO PLUS














































































































Search results

Summary of Contents for EAGLE TWO PLUS

Reviews:

Related manuals for EAGLE TWO PLUS

Brands by name

Popular brands

Whittemore Enterprises Inc. EAGLE TWO PLUS, Instructions/Service Manual

Search results

Summary of Contents for EAGLE TWO PLUS

Reviews:

Related manuals for EAGLE TWO PLUS

Brands by name

Popular brands