Whittemore Enterprises Inc. EAGLE TWO PLUS Instructions/Service Manual Download Page 14

Page: 14 / 109

USER GUIDE |

EAGLE TWO+

Version: 3.3



Shave off body hairs coming in contact with surgical site whenever necessary.

Cautions:



Avoid the use of hybrid tracers that include both metal & plastic components.



Always maintain proper ventilation in the surgical room, as surgical smoke
generated during surgery is harmful to health.



Always keep as much distance as possible between monitoring equipment,
video equipment and electrosurgical generator.



Do not disconnect the generator from main line (AC) immediately after turning off keep it
connected to the main line for at least for a minute.



If generator is relocated from cold to warm room, keep generator ON at least for half an
hour to let generator to acclimate to the room temperature.

Summary of Contents for EAGLE TWO PLUS














































































































Search results

Summary of Contents for EAGLE TWO PLUS

Reviews:

Related manuals for EAGLE TWO PLUS

Brands by name

Popular brands

Whittemore Enterprises Inc. EAGLE TWO PLUS, Instructions/Service Manual

Search results

Summary of Contents for EAGLE TWO PLUS

Reviews:

Related manuals for EAGLE TWO PLUS

Brands by name

Popular brands