Whittemore Enterprises Inc. EAGLE TWO PLUS Instructions/Service Manual Download Page 108 | Manualshive

Page: 108 / 109

background image

USER GUIDE |

EAGLE TWO+

Version: 3.3

107

Whittemore Enterprises

Inc.

warrants each product manufactured by it to be free from defects in

material and workmanship under normal use and service for the period.

Whittemore Enterprises

Inc.

obligation under this warranty is limited to the repair or replacement, at

its sole option, of any product, or part thereof, which has been returned to it or its Distributor within the
applicable time period shown below after delivery of the product to the original purchaser, and which
examination discloses, to company‟s satisfaction, that the product is defective.

This warranty does not apply to any product, or part thereof, which has been repaired or altered outside

Whittemore Enterprises

Inc.

factory in a way so as, in company‟s judgment, to affect its stability or

reliability, or which has been subjected to misuse, neglect, or accident.

The warranty periods for

Whittemore Enterprises

Inc.

products are as follows:

Electrosurgical Generators: One year from date of shipment Trolley: One year from
date of shipment Footswitches: One year from date of shipment
Sterile disposables:

Shelf life only as stated on packaging Non-Sterile

Electrodes & Cables:

Warranty on manufacturing defects only

Single use patient return electrodes:

Shelf life only as stated on packaging

Please Note: Warranty on accessories is subject to manufacturing defect before usage only.

Please Note: Whittemore Enterprises Inc. will not be liable to pay/fund any sort of penalty/due other
than the aggregate purchase price of goods sold by Whittemore Enterprises Inc. Pvt.Ltd., in case of
any damage/injury occurs to patient/ surgeon and/or any entity.

Whittemore Enterprises

Inc.

neither assumes nor authorizes any other person to assume for it any

other liability in connection with the sale or use of any of

Whittemore Enterprises

Inc.

products.

This warranty and the rights and obligations hereunder shall be construed under the governed by the
laws of the Maharashtra State, India. The sole forum for resolving disputes arising under or relating in
any way to this warranty is the Court of Mumbai, Maharashtra State, India.

Whittemore Enterprises

Inc.

its dealers, and representatives reserve the right to make changes in

equipment built and/or sold by them at any time without incurring any obligation to make the same or
similar changes on equipment previously built and /or sold by them.

Warranty

«
...
106
107
108
109
»

Summary of Contents for EAGLE TWO PLUS














































































































Reviews:

No comments

Related manuals for EAGLE TWO PLUS

Brand: UnionSpecial Pages: 56

Brand: Rangevision Pages: 31

Brand: Ecco Pages: 9

Brand: Talet Equipment Pages: 17

Brand: OfiTE Pages: 21

Brand: Earthlite Pages: 4

Brand: YATEK Pages: 78

Brand: Idmed Pages: 2

Brand: OHAUS Pages: 84

Brand: Parkside Pages: 58

RIDA qLine ZG2601

Brand: R-Biopharm Pages: 23

Brand: Vapotherm Pages: 32

Brand: Vanguard Instruments Pages: 47

Brand: ValueStore US Pages: 2

Brand: Hach Pages: 456

Brand: Garden Treasures Pages: 2

Brand: GE Pages: 289

Brand: olympia electronics Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands