Whittemore Enterprises Inc. EAGLE TWO PLUS, Instructions/Service Manual

Page: 71 / 109

USER GUIDE |
EAGLE TWO+
Version: 3.3
70
Note: It is advisable to soak longer if protein containing material is present.
2. Soak instruments vertically which cleans instrument thoroughly.
3. Rinse it thoroughly with tap water for 5 minutes.
4. Clean all surfaces of instrument using detergent solution.
5. Brush the surfaces using soft brush. Handle cord connectors, fittings and joints with care.
6. Use the soft brushes in up and down motion to clean completely through the lumen.
7. Compressed air can be used for flushing if a precise nozzle is available and if the pressure
can be controlled. Ultrasonic irrigators are also a useful way to flush instruments with
lumens to remove debris from hard-to-reach areas, and they can do so in a less time than a
manual cleaning process. The cycle time should be five minutes or less, and water
temperature should not exceed 50°C.
8. Rinse thoroughly under running distilled water for at least five minutes.
Vessel Sealing Instrument

Prepare the cleaning solution with 50% H
2
O & 50% permissible disinfectant

Do not use normal saline for cleaning of the instrument during the surgery.

In case of using non sterilized blades, assemble the instrument with blade earlier to packing the
instrument for sterilization.

Cover all the parts and assembly separately in the cloth as open assembly may damage
insulation of other parts during sterilization.

Pack all covered assembly in one bunch and send it for sterilization.
C.STORING THE GENERATOR:
If the generator is stored at a temperature outside its normal operating range of 50 to 104
0
F (10 to
40
o
C) allow it to sit at room temperature for one hour prior to use. The generator can be stored
indefinitely. You must perform specific checkout procedure before use if you see it longer than one
year.