Quick Start – 3
WheatNet-IP
/ Apr 2009
Stereo Mic I/O Template
This template creates eight Mono Microphone inputs and four Stereo outputs.
Signal names are assigned based on the BLADE ID and will have a “BLxx_yy” naming
convention, where “xx” is the BLADE ID and “yy” is source 01 through 08 or
destination 01 through 04.
Mono Mic I/O Template
This template creates eight Mono Microphone inputs and eight Mono outputs.
Signal names are assigned based on the BLADE ID and will have a “BLxx_yy” naming
convention, where “xx” is the BLADE ID and “yy” is source or destination 01 through 08.
Console I/O Template
This template creates and maps all connections needed to run your E-1 control
surface. This includes the four Program busses, along with the Headphone, Cue, and
Studio outputs. All surface output mixes are automatically routed to the Console
Blade’s rear panel connectors to help speed up the installation process.
Connection Status
After completing the setup process the BLADE will attempt to join the network.
During this process a “Connecting...” message will appear on the display.
Once the BLADE has successfully joined the network the front panel will display:
To access the Main Menu rotate the encoder and select the desired option by
pressing “Take.”
Things To Look For In The Wizard
If an online BLADE is detected with the same ID the wizard will display the
following
“IP ALREADY IN USE! VERIFY SETUP”
This message will be displayed until the user acknowledges by pressing the TAKE
button. The wizard will then start over. Simply change the BLADE ID to a unique ID
and advance through the options.
If replacing a failed BLADE on the network and you wish to assume the identity of
the failed BLADE, select the ID previously used. This will place the new BLADE on
the network in a default configuration. Once online you may restore the previous
configuration from a backup copy using the WheatNet-IP
Navigator GUI or the
BLADE Web Interface. For more information on backing up and restoring BLADE
configuration please refer to the WheatNet-IP
Navigator GUI section of the manual.
WheatNet-IP
/ June 2010