Wheatstone Corporation WheatNet-IP Blade3s Technical Manual Download

Page: 5 / 283

ead

Apr 2015

Attention!

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. This equipment must be installed and operated in a dry location free from dripping or

splashing liquids. No objects filled with liquid (such as beverage containers and the like)

shall be placed on or near the unit.

6. Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other ap

‑

paratus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding‑type plug. A polarized plug

has two blades with one wider than the other. A grounding type plug has two blades and

a third grounding prong. The wide blade or the third prong are provided for your safety.

If the provided plug does not fit into your outlet, consult an electrician for replacement

of the obsolete outlet.

10.

Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11.

Only use attachments/accessories specified by the manufacturer.

12. Unplug this apparatus during lightning storms or when unused for long periods of time.

13.

Refer all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power‑supply cord or plug is damaged, liquid has

been spilled or objects have fallen into an apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been dropped.

14.

DISCONNECTING DEVICE FROM MAINS – Main power cord plug is the disconnect

‑

ing device. The power plug of an installed unit must remain readily accessible/operable

at all times.

WheatNet-IP Blade3s

WARNING!

To reduce the risk of fire or electric shock, do not

expose this apparatus to rain or moisture.

(PRODUCT IDENTITY)

8D48

Summary of Contents for WheatNet-IP Blade3s




























































































































































































































































































Search results

Summary of Contents for WheatNet-IP Blade3s

Reviews:

Related manuals for WheatNet-IP Blade3s

Brands by name

Popular brands

Wheatstone Corporation WheatNet-IP Blade3s, Technical Manual

Search results

Summary of Contents for WheatNet-IP Blade3s

Reviews:

Related manuals for WheatNet-IP Blade3s

Brands by name

Popular brands