5/12/2017
TECH-538/D.W.O. 23160
Page 87 of 189
Final Value Hi/Lo Cutoff
Path: Configure/Setup” menu -> “2-Advanced Setup” -> “2-1 Configuration” -> “2-1-1 Position”
Figure 8-41– Final Value Hi / Lo Cutoff function
Hi Cutoff -
This function sets the valve to the fully energized position.
(Outlet Port 1 = Supply psi & Outlet Port 2 = 0 psi) when the set point is equal or greater than the Final Value High
Cutoff.
Lo Cutoff -
This function sets the valve to the fully de-energized position.
(Outlet Port 1 = 0 psi & Outlet Port 2 = Supply psi) when the set point is equal or lower than the Final Value Low
Cutoff.
