Westlock ICOT 5400, Technical Manual

Page: 143 / 189

www.westlockcontrols.com
5/12/2017 TECH-538/D.W.O. 23160 Page 143 of 189
Index Parameter mnemonic Description / EDD Help Valid Range FF Default FCT Default Deep Default Units Write
Mode
Other
R/W
56 FD_OFFSPEC_ALM This parameter is used
primarily to broadcast a
change in the associated
active conditions, which are
not masked, for this alarm
category to a Host System.
57 FD_MAINT_ALM This parameter is used
primarily to broadcast a
change in the associated
active conditions, which are
not masked, for this alarm
category to a Host System.
58 FD_CHECK_ALM This parameter is used
primarily to broadcast a
change in the associated
active conditions, which are
not masked, for this alarm
category to a Host System.
59 FD_FAIL_PRI This parameter allows the
user to specify the priority
of this alarm category.
60 FD_OFFSPEC_PRI This parameter allows the
user to specify the priority
of this alarm category.
61 FD_MAINT_PRI This parameter allows the
user to specify the priority
of this alarm category.
62 FD_CHECK_PRI This parameter allows the
user to specify the priority
of this alarm category.
63 FD_SIMULATE This parameter allows the
user to specify the priority
of this alarm category.
64 FD_RECOMMEN_ACT This parameter is a device
enumerated summarization
of the most severe condition
or conditions detected. The
EDD help should describe by
enumerated action, what
should be done to alleviate
the condition or conditions.
65 BLOCK_ERR_DESC_1 New field diagnostics for
ITK6.
Read only