5/12/2017
TECH-538/D.W.O. 23160
Page 63 of 189
Configuration using the Positioner’s Parameters (Cofg)
This menu gives access to the following eight configuration functions via the pushbuttons:
1.
Flow
- Positioner Output Flow Characteristics
2.
Type
- Positioner Recognition of Magnetic Feedback, Rotary or Linear
3.
Flop
- Positioner Fail Position, Open or Closed
4.
OPSP
- Positioner Opening Speed Adjustment
5.
CLSP
- Positioner Closing Speed Adjustment
6.
EDb
- Positioner Operating Dead-band over the Set-point Adjustment
7.
Tout
- Timeout Adjustment
8.
RTC
- Real Time Clock Adjustment
These functions allow display, speed and valve characteristic changes from standard factory settings.
From the menu level press the down button until the
Cofg
(Configuration Menu) is shown on the display.
Enter
Cofg
menu and change any of the parameters, if factory settings are not needed.