5/12/2017
TECH-538/D.W.O. 23160
Page 182 of 189
14
Appendix E – Option to use a remote 4-20mA position sensor or potentiometer
1.
The following information is applicable to the ICoT5000 series only. However, it is
NOT APPLICABLE
for the
regular
ICoT5000 positioner; it must be a TOG option for a remote 4-20mA position sensor or a POT option
for a remote potentiometer. Please make sure that the correct model was ordered and suitable to be used
with a 4-20mA position sensor or the remote potentiometer source. In case of doubt please contact
Westlock.
2.
This version of the ICoT
IS NOT CERTIFIED
to be used in classified areas. If a certified positioner to be used
in classified areas is required, please contact Westlock.
3.
Refer to technical document TECH-515 for the POT option and are using a remote potentiometer.
Refer to technical document TECH-517 for the TOG option and are using a remote 4-20mA position sensor.
