SPECIAL FUNCTIONS
116
Network Log File Contents
The network log file contents can be used by service personnel to assist with identifying specific network
connectivity issues that have been observed for a specific date/time point. The date and time of the
occurrence will need to be known to locate the associated log file events recorded.
The log files are created by use of the “Dump Log Files” special function located in the
ADVANCED/ SERVICE menu. When this feature is used, the log files are created on a USB flash
drive placed into the USB port on the back of the unit (X:\ELI380\LOG) in a .txt file format.
LogBattery MMYYYY
LogNetwork MMYYYY
A text editor (such as Notepad) can be used to search the log file contents for specific keywords listed in
any of the message strings presented below, or other entries containing text of FAIL or ERROR.
System startup showing firmware version and IP
********************
Firmware Version V2.4.2.23
17: WLAN2 Connecting targetIP 169.254.1.1
2020-04-17 17:30:00
********************
Batch processor startup showing SN and MAC:
********************
BactchProcessorTask +++
ELI380 SN: 120110000934
WLAN MAC: 00 17 23 EF 9F E6
2020-08-05 10:18:34
********************
ELI380 Device shutdown showing SN and MAC:
********************
Device Shut Down
ELI380 SN: 120110000934
WLAN MAC: 00 17 23 EF 9F E6
2020-08-05 10:19:38
********************
Failure to communicate to Ethernet bridge
********************
Firmware Version V2.4.2.23
22: WLanGetIORead2 ERROR
2020-05-11 17:34:45
22: WLanGetIORead2: failed to connect to Ethernet bridge
********************
