![background image](http://html.mh-extra.com/html/watts/lync-aegis/lync-aegis_user-manual_876881005.webp)
Lync AEGIS Controller
1: INTRODUCTION
L-OMM-013_A
• 4/20/2022Technical Support • (800) 433-5654 • Mon-Fri, 8 am - 5 pm EST
5
of
100
1. INTRODUCTION
The Aegis heat pump water heater comes equipped standard with an Eliwell PLC controller,
Carel touchscreen interface, and an available LAN interface. The Aegis heat pump software
can be fully parameterized and configured. Certain configurations depend on plant
engineering choices and must not be changed in any way except by expert personnel.
The unit can be controlled in three ways:
1. Directly via the built-in display on the main electronic controller
2. Via remote terminal/touch screen
3. Via web interface via local network or remote VPN connection
The three control methods are equivalent, however there are different levels of access through
dedicated passwords, to limit access to certain functions.
1.1. Supported Unit Types
Figure 1-1: Air Source Heat Pump (A/W)
Figure 1-2: Air Source With Cool Recovery (A/W with CW recovery)