Quick Installation Sheet | CMA-481-AEN | Page 1
Corning Optical Communications
CMA-481-AEN
HX 2.5 GHz TDD
Indoor DAS Remote Unit
Quick Installation Sheet
1. The HX 2.5 GHz TDD remote is an upgrade unit and is installed in conjunction with existing HX4, HX-WCS,
and/or MA1000/MA2000 remote.
2. In installations with an MA1000/MA2000 remote, an external passive module (EPM) is required
(ordered separately).
3. The HX 2.5 GHz TDD indoor unit can be installed in a 19-in communication rack or mounted on the wall
(dedicated brackets are provided for both mounting options).
4. The units are maintenance free. In the event of failure, only authorized personnel should handle the units.
5. Only trained and qualified personnel should be allowed to install or replace this equipment.
6. Verify that ambient temperature of the environment does not exceed 60°C (140°F)
GENERAL INFORMATION
This document describes the installation procedure of the HX 2.5 GHz TDD indoor remote unit with HX4, HX-WCS,
and MA1000/MA2000 remote.
1.
PACKAGE CONTENTS
The following items are required for installing the HX 2.5 GHz TDD. Please verify that the items listed below are
included in your kit packages. If any of the listed items are missing, contact your Corning representative.
Item Description
Quantity Image
HX 2.5 GHz TDD Remote Unit:
• HX-2500-SISO*
• HX-2500-MIMO†
*SISO models include one HX-2.5 GHz TDD Module (internal) and one slot cover
(blank panel for unoccupied HX-2.5 GHz TDD Module MIMO slot)
†MIMO models include two HX-2.5 GHz TDD Module
1
19-in Rack Brackets (factory assembled) – (default mounting
option) for rack-mount installations
2
(RT/LT)
Flat-Head Screw UNC 6-32 5/16-in (8 mm); stainless steel
12
