AquaLink
®
RS All Button Quick Review Card
Basic Operation:
The AquaLink
®
RS All Button Indoor Controller can turn your pool/spa/landscape equipment on and off two ways:
First
, you can press the button of the equipment you want to turn on. When the LED above the button is illuminated, the equipment is on (with
the exception of the heater buttons). When the LED above a button flashes, the equipment is being protected by a built-in safety delay.
Second
, you can program the equipment to turn on and off at specific times.
Owners Manual may be downloaded online @ www.jandy.com
For Technical Support call 707.776.8200 ext.260
6000 Condor Dr., Moorpark, CA, USA 93021 • 707.776.8200 • FAX 707.763.7785
Filter Pump Button
Spa Pump Button
Equipment Labels
Display
Display Hold/ Release
Heater Button
Auxiliary Buttons
Turns on the filter pump and starts
water circulation.
Turns on the filter pump and
switches water circulation from pool
to spa.
Indicates generic “AUX” labels. Cus-
tom labels can be added for each
“AUX” from the label pack.
Rotates between messages indicat-
ing time/date/temperature and status
of equipment.
Stops or starts the display rotating
through messages (e.g. time, date,
temperature).
Turns auxiliary functions on and off. If
LED is lit, function is on.
Turns heaters on and off. If LED is
green, heater is enabled. If LED is red,
heater is firing.
