Installation Procedures
•
Installing the ASM onto a Watkiss Automatic Trimmer
Watkiss Automatic SpineMaster Service Manual - Edited 17/06/04
8 - 5
9.
Fit the green earthwire under the M5 screw.
10. Refit the side cover to the ATR.
11. Reconnect the ATR to the mains power supply and check
that the ASF/ATR functions correctly. This will prove that
the interface installation is correct. Check trim guard
open function.
12. Align the ASM to the rear of the ATR and connect the
ASM interface lead to the ATR interface socket.
13. Connect the ASM to a suitable power supply of the cor-
rect voltage and test the system.
