8 - 14
Watkiss Automatic SpineMaster Service Manual - Edited 17/06/04
Installation Procedures
•
Installing the ASM onto a Duplo 400T Trimmer
11. Connect the purple and red wire into the existing con-
nector.
12. Behind the LH side cover of the Trimmer is a row of 5
relays. Connect the green and black wires to the second
relay : The relay has two male spades, unplug the exist-
ing wires, and connect the green and black wires to
these spades. Connect the existing relay wires onto the
male spades on the interface cable assembly.
13. Clip the interface wiring into the existing cable clips.
14. Refit the Side Cover.
15. Engage the docking plate into the Trimmer mounting
holes.
Black
Black
Brown
Green
Connect the Green wire
from the Interface Cable to
the R/H Relay Terminal.
Connect the existing Brown
Wire to the ’piggy-back’
connector on the Interface
Cable.
Connect the Black wire from
the interface cable to the L/H
Relay Terminal. Connect the
existing Black wire to the
’piggy-back’ connector on
the Interface Cable.
