2-6
Preparing for Operation
Preparing the IntelliStart Fluidics system
For additional information, see
and
Installing the reservoir bottles
Use standard reservoir bottles (15 mL) for instrument setup and calibration.
Use the Low-volume Adaptor Kit (sold separately) to infuse smaller volumes.
The low-volume vials have a volume of 1.5 mL.
Required material
Chemical-resistant, powder-free gloves
To install the reservoir bottles:
Caution:
To avoid accidental spillage damage to the instrument, do not
store large-volume solvent reservoirs on top of the instrument.
Warning:
The reservoir bottles can be contaminated with
biohazardous and/or toxic materials. Always wear
chemical-resistant, powder-free gloves while performing this
procedure.
Summary of Contents for Xevo TQD
