Waters Xevo TQD, Operator'S, Overview And Maintenance Manual

Page: 54 / 250

3-2 Changing the Mode of Operation
ESI mode
The following sections explain how to install and remove an ESI probe. For
further details on running ESI applications, see page 1-9 .
Installing the ESI probe
Required material
Chemical-resistant, powder-free gloves
To install the ESI probe:
1. Prepare the instrument for working on the source (see page 4-7 ).
2. Remove the protective sleeve, if fitted, from the ESI probe tip.
Warning:
The LC system connections, ESI probe, and source can
be contaminated with biohazardous and/or toxic materials. Always
wear chemical-resistant, powder-free gloves while performing this
procedure.
Warning:
To avoid electric shock, ensure that the instrument is
prepared for working on the source before commencing this procedure.
Warning:
The ESI probe tip is sharp. To avoid puncture wounds,
handle it with care.