WÄRTSILÄ WARTSILA32, Product Manual, Page: 52 / 254

DE
SCR
mode
AE
SCR
mode
DE
IMO
Tier 2
AE
IMO
Tier 2
Wärtsilä 16V32
720
560 720
560 720
560 720
560 RPM
kW/cyl
Engine speed
Cylinder output
189 190 185 189
g/kWh Fuel consumption at 50% load, MDF
33.9 34.0 33.9 34.0
kg/h Clean leak fuel quantity, MDF at 100% load
6.8 6.8 6.8 6.8
kg/h Clean leak fuel quantity, HFO at 100% load
Lubricating oil system
500 500 500 500
kPa Pressure before bearings, nom. (PT 201)
40 40 40 40
kPa Suction ability main pump, including pipe loss, max.
50 50 50 50
kPa Priming pressure, nom. (PT 201)
35 35 35 35
kPa Suction ability priming pump, including pipe loss,
max.
63 63 63 63
°C Temperature before bearings, nom. (TE 201)
81 81 81 81
°C Temperature after engine, approx.
158 158 158 158
m³/h Pump capacity (main), engine driven
130 130 130 130
m³/h Pump capacity (main), stand-by
38.0 /
45.9
38.0 /
45.9
38.0 /
45.9
38.0 /
45.9
m³/h Priming pump capacity, 50Hz/60Hz
3.9 3.9 3.9 3.9
m³ Oil volume, wet sump, nom.
12.1 12.1 12.1 12.1
m³ Oil volume in separate system oil tank, nom.
0.35 0.35 0.35 0.35
g/kWh Oil consumption (100% load), approx.
3760 3760 3760 3760 l/min Crankcase ventilation flow rate at full load
0.1 0.1 0.1 0.1 kPa Crankcase ventilation backpressure, max.
8.5...9.5 8.5...9.5 8.5...9.5 8.5...9.5 liters Oil volume in turning device
1.9 1.9 1.9 1.9 liters Oil volume in speed governor
Cooling water system
High temperature cooling water system
250 +
static
250 +
static
250 +
static
250 +
static
kPa Pressure at engine, after pump, nom. (PT 401)
530 530 530 530
kPa Pressure at engine, after pump, max. (PT 401)
77 77 77 77
°C Temperature before cylinders, approx. (TE 401)
96 96 96 96 °C HT-water out from engine, nom (TE432)
140 140 140 140
m³/h Capacity of engine driven pump, nom.
150 150 150 150 kPa Pressure drop over engine, total
100 100 100 100
kPa Pressure drop in external system, max.
70...150 70...150 70...150 70...150 kPa Pressure from expansion tank
0.84 0.84 0.84 0.84
m³ Water volume in engine
Low temperature cooling water system
250 +
static
250 +
static
250 +
static
250 +
static
kPa Pressure at engine, after pump, nom. (PT 451)
530 530 530 530
kPa Pressure at engine, after pump, max. (PT 451)
25 ... 38 25 ... 38 25 ... 38 25 ... 38 °C Temperature before engine (TE 451)
120 120 120 120
m³/h Capacity of engine driven pump, nom.
3-28 Wärtsilä 32 Product Guide - a21 - 7 September 2016
Wärtsilä 32 Product Guide 3. Technical Data