Wacker Neuson HI750 Series, Operator'S Manual, Page: 77 / 144

ghi_tx001315gb_FM10.fm
77
HI750 Burner Setup—Diesel
Continued from the previous page.
3. Tighten the acorn nut (c) .
Result The “Z” distance has now been set.
Continue by setting the head position.
Set the head
position Perform the procedure below to set the head position.
1. Slide the secondary adjusting plate (d) and the indicator adjusting plate (e) so
that the indicator adjusting plate aligns with “4” on the scale.
2. Tighten the hex head screw (b) .
3. Tighten the spline nut.
4. Reconnect the copper fuel line.
Result The procedure to set the “Z” distance and head position is now complete.
wc_gr008320
b
c
d
a
e