Wacker Neuson HI750 Series, Operator'S Manual, Page: 42 / 144

ghi_tx001258gb_FM10.fm
42
Operation HI750
Continued from the previous page.
Procedure Perform the procedure below to position the machine.
1. Place the machine near the application area on solid, stable, and level ground.
2. For machines with trailers, install chocks (a) under the wheels.
Result The machine is now properly positioned.
4.8 Electrical and Grounding Requirements
Electrical
requirements
■
Ensure that the machine is connected to a reliable, consistent source of electric
power.
■
The electric power source must be grounded per the requirements below and
connected to a freely accessible circuit breaker.
Extension
cords
■
Ensure that extension cords (if used) are properly sized for the installation. Do
not use worn, bare, or frayed cords!
■
Use only 3-wire type extension cords with heavy-duty plugs.
■
The maximum length of extension cord usage per circuit is 30 m (100 ft).
■
For 240V connections, use 8-gauge extension cords.
■
For 120V connections, use 12-gauge extension cords.
Grounding
requirements Electrical grounding must comply with the National Electric Code ANSI/NFPA 70 or
the CSA C22.1 Canadian Electrical Code, Part 1.
wc_gr008340
a
WARNING
Fire hazard and electric shock hazards. The use of an inappropriate power supply,
or undersized extension cords, can lead to fire and electric shock. Fire and electric
shock can cause severe injury.
►
Before use, ensure that the machine is properly connected to an appropriate
power source and grounded per the requirements provided below.
►
Do not use undersized extension cords.