Wacker Neuson HI750 Series, Operator'S Manual, Page: 51 / 144

ghi_tx001258gb_FM10.fm
51
HI750 Operation
4.17 Starting the Generator (if equipped)
Procedure Perform the procedure below to start the generator.
1. Open the generator access door (a) .
2. Set the circuit breaker (b) to the OFF position.
3. Turn the key switch (c) to the PREHEAT position (c
1
) . Hold the key until the
glow plug indicator (c
2
) goes out.
4. Turn the key switch to the START position (c
3
) . Hold the key until the engine
starts, and then release the key.
5. Set the circuit breaker to the ON position.
Note: For more detailed information about operating and maintaining the
generator, see the generator owner’s manual shipped with the machine. The
procedure for bleeding air from the generator fuel lines can be found in the
“Maintenance” chapter.
6. Close the generator access door (a) .
wc_gr007614
a
b
c
2
c
3
c
1
c