Wacker Neuson BS 50-4s, BS 50-4As, Repair Manual

Page: 77 / 194

wc_tx004029gb_FM10.fm
77
Rammer Disassembly and Reassembly
Continued from the previous page.
2. Assemble the air tube adapter (s) , upper gasket (t) , carburetor (u) , and lower
gasket (v) to the carburetor adapter (w) with screws (q) and washers (r) . Torque
screws to 5 Nm (4 ft.lbs.).
.
3. Install the two washers (n) and two nuts (o) fastening the adapter gasket (p) and
the carburetor assembly (m) to the machine. Torque to 10.8 Nm (8 ft.lbs.).
4. Connect the fuel filter hose (h) and the fuel hose (k) .
5. On machines with revision 104 and higher, connect the oil hose (j) .
This procedure continues on the next page.
q
s
u
r
t
v
w
wc_gr012664
wc_gr012882
m
n
n
p
o
h
k
j