wc_tx004029gb_FM10.fm
73
Rammer
Disassembly and Reassembly
Continued from the previous page.
NOTICE:
To avoid breaking the fittings, do not pull the hoses off the carburetor
fittings. Use a utility knife to cut hose as close to the fitting as possible. Carefully
cut the remaining hose from the fitting.
6. Clamp if necessary, then cut the fuel filter hose
(h)
close to the carburetor
fittings and drain the fuel into an approved container.
7. Clamp if necessary, then cut the fuel hose
(k)
close to the carburetor fittings and
drain the fuel into an approved container.
8. On machines with revision 104 and higher, clamp if necessary, then cut the oil
hose
(j)
close to the oil fitting. Drain the oil into an approved container.
9. Remove two nuts
(o)
and two washers
(n)
from the carburetor assembly
(m)
.
10.Remove the carburetor assembly
(m)
and the adapter gasket
(p)
from the
machine.
This procedure continues on the next page.
wc_gr012882
m
n
n
p
o
h
k
j
Summary of Contents for BS 50-4s, BS 50-4As
