Wacker Neuson BS 50-4s, BS 50-4As, Repair Manual

Page: 48 / 194

wc_tx004029gb_FM10.fm
48
Rammer Disassembly and Reassembly
4.5 Removing the Ramming Shoe—BS50
Requirements
■
Torque wrench
■
Lifting device capable of lifting the machine
■
See chapter Technical Data for weights
Procedure Perform the procedure below to remove the ramming shoe.
1. Using the lifting device, support the machine in a vertical position.
2. Remove the six nuts (a) and the lock washers (b) .
3. Remove the lifting handle (c) and the two spacers (d) .
This procedure continues on the next page.
To view an animation of this procedure, internet access
is needed.
To view the animation, click on the video icon or scan
the QR code with a smart phone.
WARNING
Crushing hazard. The machine may fall if not properly suspended during ramming
shoe replacement.
►
Only use appropriate lifting devices and techniques when lifting the machine.
wc_gr012676
a
b
g
f
e
d
c
b
a