Wacker Neuson BS 50-4s, BS 50-4As, Repair Manual

Page: 160 / 194

wc_tx004029gb_FM10.fm
160
Rammer Disassembly and Reassembly
Continued from the previous page.
4. Tighten the nut (d) on the impact bushing puller to remove the impact bushing
(b) and discard the impact bushing.
5. Place a drift pin through the holes on the end of the ram (e) to prevent the ram
from turning.
6. Use an impact wrench to remove the locknut (k) .
7. Remove the piston guide (j) .
8. Remove the upper spring set (g) and the bushing (f) from the spring cylinder (h) .
Result The upper spring set has now been removed.
c
h
e
d
b
j
k
g
f
a
c
b
wc_gr012843