Wacker Neuson BS 50-4s, BS 50-4As, Repair Manual

Page: 154 / 194

wc_tx004029gb_FM10.fm
154
Rammer Disassembly and Reassembly
Continued from the previous page.
7. With the threaded rod (d) holding the spring system cover (e) in place, remove
the remaining screws (b) from the spring system cover.
8. Slowly loosen the threaded rod (d) until the springs have fully expanded and the
pressure is released.
9. After all the spring pressure is released, remove the spring box screws (c) and
remove the spring box tool (a) .
10.Remove the spring system cover (e) , the gasket (f) , and the lower spring set
(g) .
Result The spring system cover has now been removed.
wc_gr012834
d
d
b
e
c
g
c
a
e
f