Wacker Neuson BS 50-4s, BS 50-4As, Repair Manual

Page: 153 / 194

wc_tx004029gb_FM10.fm
153
Rammer Disassembly and Reassembly
Continued from the previous page.
3. Align three holes in the spring box tool (a) with the three screws (b) in the spring
system cover.
4. Remove the three screws (b) .
5. Insert the three spring box screws (c) through the three selected holes in the
spring box tool and turn the screws into the spring cylinder until they bottom out.
6. Turn the threaded rod (d) through the center of the spring box tool until it
reaches the spring system cover.
This procedure continues on the next page.
wc_gr012832
c
d
c
b
b
b
a