Wacker Neuson BS 50-4s, BS 50-4As, Repair Manual

Page: 71 / 194

wc_tx004029gb_FM10.fm
71
Rammer Disassembly and Reassembly
Continued from the previous page.
17.Lay the rammer flat on the ground and align the protective pipe (f) with the
crankcase.
18.Position the upper clamp (c) so the adjustment screw is 90° from the sight glass
(p) .
19.Position the lower clamp (e) so the adjustment screw is 90° from the sight glass
(p) .
20.Torque the upper and lower clamps to 13.5 Nm (10 ft.lbs.).
21.Fill the ramming system with clean oil.
22.Run the rammer for several minutes and check it for oil leaks around the guide
cylinder and the bellows.
Result The bellows have now been installed.
wc_gr012851
c
e
f
p